Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for East New York Homeowners
A fireplace that smokes into the room, won’t light, or smells of creosote is telling you something the rest of the house can’t. In East New York, most of the masonry fireplaces and inserts we see sit inside older row houses and semi-detached homes where the firebox, damper, and flue have worked together for decades. When one part drifts out of spec, the whole system suffers. Our technicians have up to 12 years of experience diagnosing exactly where that failure starts, and we bring the same professional-grade materials certified chimney professionals use: Gelco, Olympia Chimney, Famco, and Copperfield among them. We answer 24/7 at (855) 337-0826, and same-day repair is often possible when you call early. We inspect before we recommend, so you see the evidence before anyone quotes a fix.
What Our Fireplace Repair Service Includes
Your fireplace is a system, not just a flue. The firebox, damper, smoke chamber, and chimney all have to work in sequence, and a weak link anywhere shows up as smoke, odor, or a fire that won’t draw. Here’s how we handle each part of the repair side of that system.
Gas Fireplace Repair
Gas fireplaces fail in predictable ways: a burner that lights unevenly, a flame that lifts off the ports, or a log set that produces soot instead of a clean blue burn. These symptoms usually point to a clogged burner orifice, a misadjusted air shutter, or a venting problem, and we test each of those before recommending parts. We service gas fireplaces built around components from Olympia Chimney and other professional lines, and we check the vent termination as part of the diagnosis because a gas fireplace that vents poorly is a carbon monoxide concern, not just a cosmetic one. If the repair involves the gas supply line itself, we’ll tell you plainly that a licensed gas fitter needs to handle that portion.
Wood Burning Fireplace Repair
Wood fireplaces develop problems slowly: a damper that no longer seals, a firebox floor that’s spalled and cracked, mortar joints in the smoke chamber that have eroded. Any of those can send smoke into the room or let heat reach framing it was never meant to touch. We repair masonry fireboxes with refractory materials rated for the temperatures involved, and we rebuild smoke chambers where the original parging has failed. When a wood fireplace has been unused for years, we inspect the full flue before the first fire, because a cracked flue tile behind an intact firebox is easy to miss without a camera.
Fireplace Insert Service
Inserts are efficient, but only when the liner connection and the surround seal are right. A common problem we find is an insert installed into a flue that’s oversized for it, which causes poor draft and creosote buildup in the wrong place. We service inserts by checking the connection collar, the liner, the blower, and the gaskets, then addressing whichever one is causing the symptom. If the insert needs a new liner, we install DuraFlex flexible liner systems, which are the professional-grade relining product certified sweeps rely on for this kind of work.
Damper Repair
A damper that won’t open fully, won’t close tight, or has rusted into place is one of the most common calls we get. An open damper in an unused fireplace pulls heated air up the chimney all winter, and a damper that won’t open lets smoke back into the room. We repair or replace throat dampers, and we can install a top-sealing damper where the original hardware is beyond saving. Either way, you get a damper that seals, which is the point.
Firebox Repair
The firebox takes the most heat in the entire system, and its refractory brick and mortar crack under repeated heating and cooling. Small hairline cracks in the mortar are normal; wide cracks, missing mortar, or a firebox floor that’s crumbling are not, because heat can reach the masonry behind them. We rebuild firebox panels and floors with heat-rated refractory mortar, and we use HeatShield where resurfacing is the right call rather than a full rebuild. HeatShield is a proprietary liner resurfacing system that restores a damaged surface without tearing out the original structure.
Pilot Light Repair
A gas fireplace pilot that won’t stay lit usually means a thermocouple, thermopile, or pilot orifice issue, and sometimes a draft that’s blowing it out. We test the pilot assembly, clean the orifice, and check that the venting isn’t pulling the flame away before replacing anything. If the pilot lights but the main burner won’t come on, that points to the valve or the switch circuit, and we trace it methodically instead of guessing. Pilot work on a gas appliance means working around a live gas supply, so we treat it with the care that requires.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Fireplace Repair
We work with components from Gelco, Olympia Chimney, Famco, and Copperfield, and we know where each of these product lines tends to wear out. Gelco dampers and top-sealing hardware show their age at the hinge and the gasket first, which is why a damper that “works” can still leak air all winter. Olympia Chimney venting components are common on gas installations, and we know how their connection fittings seat and what a failing joint looks like from the outside. Famco and Copperfield components turn up throughout the firebox and chimney assemblies we repair, and working with those professional supply lines means we’re matching the repair to the hardware that’s actually installed, not substituting a big-box part that fits loosely.
What that means for you is simpler than it sounds: we don’t need to guess what’s in your fireplace. We identify the make and the components, then repair to spec. Whether you have Gelco, Olympia Chimney, Famco, Copperfield, or any other make, we can help, and if the right repair is a resurfacing rather than a replacement, we’ll say so.
Signs You Need Fireplace Repair Right Now
- Smoke rolling into the room instead of up the flue. This usually means a damper stuck partly closed, a smoke chamber that’s lost its parging, or a flue that’s blocked or undersized. It’s worth stopping the fire and calling, because smoke in the room also means combustion products are in the room.
- A strong creosote or campfire smell when the fireplace is off. Odor when there’s no fire points to creosote deposits in the flue or a damper that isn’t sealing. Both are repairable, and both get worse the longer the fireplace sits unused.
- Cracked or crumbling firebox mortar. Hairline cracks are common, but wide cracks or missing mortar let heat reach the masonry behind the firebox. That’s a repair-before-next-fire situation, not a wait-and-see.
- A gas log set that won’t light evenly or leaves soot on the logs. Uneven flame or soot means the burner or air mixture is off, and an improperly burning gas appliance can produce carbon monoxide. Stop using it and get it checked.
- Rust, water stains, or a damper that’s seized. Water getting past a failed cap or crown corrodes the damper and the firebox hardware. A seized damper is usually the visible end of a moisture problem that started at the top of the chimney.
Our Fireplace Repair Process – Step by Step
- 1
We start with an inspection, not a sales pitch. Before we quote any repair, we look at the fireplace as a system: firebox, damper, smoke chamber, flue, cap, and crown. We run a camera through the flue so we can see the interior condition rather than assume it, and you see what we see.
- 2
We diagnose the actual cause. A smoking fireplace can be a draft problem, a damper problem, or a flue problem, and the fix is different for each. We test the damper operation, check the smoke chamber geometry, and confirm the flue is the right size for the opening before recommending anything.
- 3
We explain the options in plain terms. You get the diagnosis, the repair options, and an honest read on what can wait and what can’t. If a resurfacing with HeatShield will solve a firebox problem, we’ll tell you that instead of quoting a full rebuild.
- 4
We do the repair with professional-grade materials. Refractory mortar, HeatShield resurfacing, DuraFlex liners, and damper hardware from Gelco or Olympia Chimney, depending on what the job calls for. Nothing gets patched with a material that isn’t rated for the temperature it will see.
- 5
We verify the repair before we leave. That means testing the damper through its full range, confirming draft with the fireplace in operation where it’s safe to do so, and walking you through what we did. If the repair needs a follow-up, you’ll know exactly what and when.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in East New York?
Fireplace repair in East New York typically runs from about $150 for a damper adjustment or pilot light repair up to $2,500 or more for a firebox rebuild or liner restoration, depending on what’s actually wrong. A typical damper repair runs $150 – $400. Pilot light and gas burner repairs usually land between $150 and $350. Firebox repointing or crack repair runs $300 – $900, and a full firebox rebuild with refractory materials runs $1,200 – $2,500. HeatShield resurfacing, which restores the liner without a full reline, typically falls in the $1,000 – $2,500 range depending on flue size and condition.
What moves the price is access, the extent of the damage, and whether the repair needs a liner component. A firebox crack that’s surface-level is a different job from one that’s gone through to the masonry. How to avoid overpaying: get the diagnosis in writing, ask to see the camera footage, and be skeptical of any recommendation that doesn’t come with evidence you can look at yourself. Our estimates are free, the price is set per job by the written estimate, and we’ll tell you when a repair can safely wait. Call (855) 337-0826 for an exact quote – estimates are free.
Fireplace Repair Near East New York – Our Service Area
We serve East New York and the surrounding neighborhoods, including Cypress Hills, Brownsville, Brighton Beach, Springfield Gardens, Rosedale, Cambria Heights, Cedarhurst, Woodmere, and the Valley Streams. If you’re nearby and wondering whether your fireplace needs attention, our chimney sweep East New York service is often the right first step, since a sweep and inspection tells us the condition of the flue before any repair decision. For larger fireplace work, we also cover fireplace repair in Brighton Beach and fireplace repair in Springfield Gardens. We answer 24/7 at (855) 337-0826, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Serving East New York, NY – Our Local Coverage Area
We serve East New York and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in East New York
Fireplace repair is the work of restoring the components that make a fireplace function: the firebox, damper, smoke chamber, insert connection, and gas burner assembly. It’s different from a sweep, which removes creosote, and different from chimney repair, which addresses the structure above the roofline. In East New York, most fireplace repair calls come down to a damper that won’t seal, a cracked firebox, or a gas log set that won’t burn cleanly. Call (855) 337-0826 and we’ll tell you which one you’re looking at.
Most fireplace repairs take between one and three hours, with damper and pilot light work at the short end and firebox resurfacing at the longer end. A full firebox rebuild or liner restoration can run a full day, and we’ll tell you the expected time when we give you the estimate. We don’t start a job without knowing what we’re walking into, which is why the inspection comes first. Call (855) 337-0826 to book an inspection and get a realistic timeline.
Fireplace repair in East New York typically costs $150 – $400 for a damper or pilot light repair, $300 – $900 for firebox repointing, and $1,000 – $2,500 or more for resurfacing or a rebuild. The final price depends on the extent of the damage and whether liner components are involved. The written estimate sets the final price, and the estimate itself is free. Call (855) 337-0826 for an exact quote.
Yes, we service Gelco and Olympia Chimney components as well as Famco and Copperfield hardware, and we know where each of those lines tends to wear out. Damper hardware, venting components, and firebox assemblies from these makers are all within our repair scope. We identify the make and model before recommending parts so the repair matches what’s installed. Call (855) 337-0826 and tell us what you have.
Same-day fireplace repair is often possible when you call early, and we dispatch Sunday through Friday, 7am to 7pm. We answer 24/7, so a call outside dispatch hours gets booked into the next opening. We’re closed Saturday. Call (855) 337-0826 to check availability for your address.
Yes, our fireplace repair work is backed by a satisfaction guarantee, and the specific coverage is spelled out in your written estimate so there’s no ambiguity later. If a repair we made doesn’t perform the way it should, we come back and make it right. We’d rather fix it properly the first time than have you call us twice. Call (855) 337-0826 with any warranty question before or after the job.
Clear the hearth area and about three feet in front of the fireplace so we can work and set up a camera without moving your belongings. Don’t burn a fire for at least 24 hours before the visit, and if you have a gas fireplace, leave the gas valve in its normal position and tell us if you’ve smelled gas. Have any paperwork or model information you have on hand, though we can identify most components ourselves. Call (855) 337-0826 if you’re unsure what to do before we arrive.
Schedule Your Fireplace Repair Service in East New York Today
If your fireplace is smoking, won’t light, or smells of creosote when it’s cold, don’t wait for the first cold snap to find out why. Call (855) 337-0826 for a free, no-obligation estimate. We inspect before we recommend, we show you the evidence, and we use the professional-grade materials this work requires. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep East New York.