Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for East New York Homeowners
Most chimney problems in East New York are invisible from the ground, and that’s the whole reason an inspection matters. A cracked flue tile, a gap where the liner has pulled away, a crown that’s been quietly soaking up water – none of it shows from your living room, and none of it fixes itself. Our technicians have up to 12 years of experience reading exactly these conditions, and we offer inspection as a standalone service so you get an honest assessment before anyone recommends a repair. We use professional-grade materials from brands like HeatShield and DuraFlex when work is needed. Call (855) 337-0826 – we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and same-day inspection is often possible.
What Our Chimney Inspection Service Includes
An inspection isn’t one thing. What you need depends on what kind of appliance you burn, what’s happened to the chimney since it was last checked, and whether a sale or a repair decision is on the table. We work through six distinct inspection types, and we’ll tell you plainly which one your situation calls for.
Level 1 Inspection
A Level 1 is the basic annual check: readily accessible portions of the chimney, the firebox, the damper, and the visible flue, evaluated while the appliance stays connected. It’s what you book for routine upkeep when nothing has changed in how the chimney is used. We perform it alongside your annual sweep, checking for blockages, creosote buildup, and the early signs of liner wear before they turn into repair work.
Level 2 Inspection
A Level 2 goes further, covering everything in a Level 1 plus the attic, crawlspace, and other accessible areas, with a video scan of the flue interior. It’s the inspection you need after a chimney fire, after a change of appliance or fuel type, after an earthquake or structural event, or when a property changes hands. We run the camera the full length of the flue and give you a photo report of what we find.
Level 3 Inspection
A Level 3 is a targeted investigation that requires access to concealed areas, which can mean removing part of a wall or other building assembly to reach the chimney. It’s reserved for cases where a serious defect is suspected but can’t be confirmed any other way. We explain exactly what access is required and why before any opening is made, so there are no surprises.
Camera Inspection
A camera inspection sends a lighted video head down the flue so we can see the liner’s true condition: cracks, gaps at the joints, offset tiles, and any separation that a visual check from the firebox would miss. It’s the single most useful diagnostic tool in chimney work, and it’s included with a Level 2. You see the footage and the photos yourself rather than taking our word for it.
Flue Inspection
The flue is the passage the smoke travels through, and its condition decides whether your chimney vents safely. A flue inspection checks for blockages from nests or debris, measures the flue against the appliance, and looks for the cracking and spalling that let combustion gases escape into the house. We treat this as the core of the visit – if the flue isn’t sound, nothing else about the chimney matters.
Real Estate Inspection
When a home in East New York is being bought or sold, the chimney is one of the most commonly overlooked systems in the transaction. A real estate inspection gives the buyer and seller a documented, camera-backed picture of the chimney’s condition and what any needed repair would involve. It’s a standalone service, so there’s no repair upsell attached to the report.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Work With for Chimney Inspection
Our diagnostic recommendations are backed by access to the same product lines certified chimney professionals specify. When an inspection turns up a liner problem, we’re working with HeatShield, the proprietary resurfacing system used to restore a damaged flue without a full reline, and DuraFlex flexible liner systems for cases that genuinely need relining. Knowing these systems in detail is what lets us tell you accurately whether your chimney can be restored or actually needs replacement – a distinction many sweep-only companies can’t make.
We also work with Gelco and Olympia Chimney components for caps, crowns, and related system parts, and with Famco and Copperfield, professional supply-channel brands that generalist contractors typically don’t have access to. Whether your chimney carries Gelco or Olympia Chimney hardware or any other make, we can help, and we’ll tell you what the inspection supports rather than what’s convenient to sell. Proper repair, not a patch, is how we approach every recommendation.
Signs You Need Chimney Inspection Right Now
Some of these you’ll notice yourself. Others only show up during a proper scan, which is why the annual check exists in the first place.
- You smell smoke in the house when the fire is lit. A little puff on start-up is normal; smoke rolling back into the room through a full burn usually means a blockage or a draft problem. That points to a flue issue an inspection can pin down.
- There’s a dark, flaky buildup inside the firebox or at the damper. Creosote in its glazed form is the fuel that turns a small chimney fire into a serious one. Glazed creosote means the flue needs to be examined, not just cleaned.
- You’ve had a chimney fire, even a small one. Many chimney fires go unnoticed by the homeowner and only show up as cracked tiles or warped metal on a scan. After any suspected fire, a Level 2 with camera is the right move.
- Water stains or white chalky deposits on the masonry. That’s moisture working through the crown or the brick, and freeze-thaw cycles in this part of Brooklyn will widen the damage each winter. Catching it early is the difference between a crown repair and a rebuild.
- You’re buying, selling, or changing what you burn. A new wood stove, a switch to gas logs, or a home sale all call for a Level 2. The appliance and the flue have to match, and the inspection is what confirms it.
Our Chimney Inspection Process – Step by Step
We inspect before we recommend. Here’s how a visit actually goes so you know what to expect.
- 1
We start with a conversation. We ask what you burn, how often, whether you’ve had smoke problems or a fire, and when the chimney was last checked. That history tells us which inspection level applies and keeps you from paying for a scan you don’t need.
- 2
We sweep or clear first when required. Creosote and debris block the view, so a light sweep comes before a thorough scan. A chimney sweep East New York visit paired with inspection is the standard annual combination.
- 3
We examine the accessible system. Firebox, damper, smoke chamber, visible flue, cap, crown, and the exterior masonry all get checked against the conditions we’d expect for the appliance in use.
- 4
We run the camera. A lighted video head travels the full length of the flue. You see the footage as we go, and we photograph anything that needs attention.
- 5
We hand you findings, not a sales pitch. You get a plain-language summary with the photos, and a written estimate if work is warranted. Nothing is recommended without camera evidence you can see for yourself, and if a repair can safely wait, we say so.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Inspection Cost in East New York?
Inspection pricing here tracks the depth of the work: a basic visual check costs far less than a full camera scan with a written report. A typical Level 1 visual inspection in East New York runs around $100 – $200, while a Level 2 with camera inspection and a photo report generally falls in the $200 – $350 range. Level 3 investigations, which involve opening concealed areas, are priced per job once we know what access is required. Pairing the inspection with an annual sweep usually keeps the combined cost below booking each separately.
Several things move that range: the number of flues, the height and accessibility of the chimney, whether a sweep is needed first, and whether a real estate report is included. The best way to avoid overpaying is to ask which inspection level you’re actually getting and why – a company that can’t explain the difference is probably upselling. A written estimate sets the final price, the estimate is free, and nothing on it is added later without your say-so.
Chimney Inspection Near East New York – Our Service Area
We cover East New York and the neighborhoods around it, including Cypress Hills and Brownsville, and we connect homeowners across the region with independent local professionals for a chimney inspection. We also regularly serve Rosedale, Cambria Heights, and Springfield Gardens, plus the Nassau County communities of Valley Stream, South Valley Stream, North Valley Stream, Cedarhurst, and Woodmere. If you’re not sure whether you’re in range, call and we’ll confirm. You can also book a chimney inspection and we’ll get you scheduled into the next opening.
Serving East New York, NY – Our Local Coverage Area
We serve East New York and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in East New York
A chimney inspection is a professional evaluation of your chimney system’s condition, from the firebox and damper to the flue interior, cap, and crown. It tells you whether the chimney vents safely and what, if anything, needs repair. It’s not the same as a sweep – a sweep cleans, an inspection diagnoses. We often do both in one visit. Call (855) 337-0826 for an exact quote – estimates are free.
A Level 1 inspection usually takes 30 to 45 minutes, while a Level 2 with camera typically runs 45 minutes to an hour and a half depending on the chimney’s complexity. Add time if a sweep is needed first or the flue has multiple liners. We’ll give you a realistic time estimate when you book so you can plan your day. Call (855) 337-0826 for an exact quote – estimates are free.
A Level 1 visual inspection in East New York typically runs $100 – $200, and a Level 2 with camera and photo report generally lands in the $200 – $350 range. Level 3 investigations that require opening walls are quoted per job once we know the access involved. The written estimate sets the final price, and the estimate itself is free. Call (855) 337-0826 for an exact quote – estimates are free.
Yes. We work with Gelco and Olympia Chimney components, along with Famco and Copperfield, and we understand how each of these product lines performs in service. If your inspection calls for a cap, crown, or component replacement, we can specify the right professional-grade part. Whichever make your chimney carries, we can help. Call (855) 337-0826 for an exact quote – estimates are free.
Same-day inspection is often possible, depending on the schedule; most visits are booked into the next open slot. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday. Call (855) 337-0826 for an exact quote – estimates are free.
Inspection findings are backed by camera evidence you see yourself, and any repair work we recommend carries a satisfaction guarantee. We stand behind our diagnostics – if we say a liner needs restoration, we show you the footage that justifies it. Our technicians have up to 12 years of experience, and we use professional-grade materials from HeatShield, DuraFlex, and the other industry brands we work with. Call (855) 337-0826 for an exact quote – estimates are free.
Clear the area around the fireplace hearth and make sure we can reach the firebox, damper, and any attic or crawlspace access. Hold off on lighting a fire for at least 24 hours before the visit so the flue is cool and safe to scan. Let us know about any past chimney fires, smoke problems, or recent appliance changes when you book. Call (855) 337-0826 for an exact quote – estimates are free.
Schedule Your Chimney Inspection Service in East New York Today
Your chimney is a system, not just a flue, and a proper inspection is how you find out where it stands before something small becomes expensive. We inspect before we recommend, show you the evidence, and tell you honestly when work can wait. Call (855) 337-0826. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and the estimate is free.
Written by the team at Chimney Sweep East New York.